tel: 310-325-1043 fax: 310-325-1044 www.mpsind.com sales@mpsind.com pp18d series ? power rating up to 30 watts ? high effciency ? footprint 19.6 mm x 18.0 mm ? lower profle of 7.4 mm ? high isolation (operational) 1500 vdc ? high frequency 300 khz C 3.0 mhz ? operating temperature -40oc to +125oc ? custom design available electrical parameters @25c part number pp18d- primary inductance (h min) leakage inductance (h max) dc resistance (m max) turns ratio isolation (v dc ) figure primary secondary primary secondary 0601 48 0.50 50.0 1.50 6t 1t // 1t 1500 a 0602 48 0.50 50.0 3.00 6t 1t+1t 1500 a 0603 48 0.40 50.0 20.0 6t 3t 1500 b 0606 48 0.40 50.0 40.0 6t 6t 1500 c 0608 48 0.30 50.0 60.0 6t 8t 1500 c 0610 48 0.30 50.0 80.0 6t 10t 1500 c 1201 190 1.50 156 1.50 12t 1t // 1t 1500 a 1202 190 1.50 156 3.00 12t 1t+1t 1500 a 1203 190 1.30 156 20.0 12t 3t 1500 b 1206 190 1.30 156 40.0 12t 6t 1500 c 1208 190 1.15 156 60.0 12t 8t 1500 c 1210 190 1.15 156 80.0 12t 10t 1500 c product performance is limited to specifed parameters. data is subject to change without prior notice. planar transformers high frequency 30 watt application of configuration application of configuration part number pp18d- v in v out / i out part number pp18d- v in v out / i out 0601 18 C 36 vdc 1.2v@25.0a --1.8v@16.7a 1201 36 C 75 vdc 1.2v@25.0a --1.8v@16.7a 0602 18 C 36 vdc 2.5v@12.0a -- 3.3v@9.00a 1202 36 C 75 vdc 2.5v@12.0a -- 3.3v@9.00a 0603 18 C 36 vdc 5.0 v @ 6 a 1203 36 C 75 vdc 5.0 v @ 6 a 0606 18 C 36 vdc 8.0v@3.75a -- 10v@3.00a 1206 36 C 75 vdc 8.0v@3.75a -- 10v@3.00a 0608 18 C 36 vdc 12v@2.50a -- 15v@2.00a 1208 36 C 75 vdc 12v@2.50a -- 15v@2.00a 0610 18 C 36 vdc 16v@1.88a -- 18v@1.67a 1210 36 C 75 vdc 16v@1.88a -- 18v@1.67a notes: 1. the inductance is measured in primary windings pin (1-2) at 100 khz 100 mvrms. 2. the leakage inductance is measured in primary winding pin (1 -2) with all other windings shorted.
tel: 310-325-1043 fax: 310-325-1044 www.mpsind.com sales@mpsind.com product performance is limited to specifed parameters. data is subject to change without prior notice. dimensions unless otherwise specifed, all tolerances are: inch: .xx : 0.015 .xxx : 0.004 mm: x,x : 0,38 x,xx : 0,10 dimensions (mm) schematics figure a figure b figure c suggested pad layout pp18d series planar transformers high frequency 30 watt
|